Connect Texada to HubSpot
Set up the Texada source connection, verify it, and configure your first Synkazo sync job.
Before you start
Install Synkazo for HubSpot first, then choose Texada as the source platform for your project. The source platform and project sync mode are permanent choices for that project.
Credentials required
- Tenant
- API Key
Find them in: Texada Cloudlink account → API settings.
Connect Texada
- 1Open the project Connections tab.
- 2Choose Texada as the source if the project still asks you to choose a source platform.
- 3Select Connect on the Texada card, then choose Manual Setup.
- 4Enter the Tenant, API Key.
- 5Select Verify Credentials. Continue only after Synkazo reports that the connection was verified.
Choose what to sync
When you create a job, Synkazo loads the objects and fields available to the connected account. Current connector coverage includes:
- Customers
- Primary contacts
- Influencer contacts
- Opportunities
The object selector in Synkazo is authoritative for your account; availability can depend on connector access and your Synkazo plan.
Configure the first sync
Texada is currently used as a source: records flow from Texada into HubSpot through a One Way project.
The current Texada connection is read-only and cannot be used as a sync destination.
- 1From the Connections tab, select Next step: Create Sync Job.
- 2Choose a Texada source object and the HubSpot destination object.
- 3Confirm the job behavior, review the proposed field mappings, and choose one mapping as the match field.
- 4For a One Way job, choose the available schedule. Two Way jobs are kept synchronized automatically and do not show the same schedule controls.
- 5Create the job, set it to Active, select Start Sync, and use Sync All to establish the first complete baseline.
- 6Open Overview and Run History to confirm the run completed and review created, updated, skipped, or failed records.